cecotec FORCECLIMA 9050 Manual De Instrucciones página 30

ENGLISH
a) Inserting Batteries into Remote Control
The remote control is operated by 2 x 1.5 V AAA batteries (not included). Please insert 2 x 1.5 V
batteries (not included with the product) when operating the appliance for the first time.
• To insert the batteries, open the battery compartment by sliding the battery compartment
cover (J) on the back of the remote control in direction of the arrow. Insert the batteries
with the correct polarity (+/-). Follow the polarity signs inside the battery compartment.
Close the battery compartment.
• Replace the batteries as soon as the product no longer responds to commands from the remote control.
• Only use batteries of the same or equivalent type. Remove all batteries, if you are not going to use the
appliance for a while to prevent damage. Then close the battery compartment. Ensure that the cover
clicks into place correctly. Follow the safety information when handling batteries/rechargeable batteries .
Control panel
1. Timer
2. Fan speed button
3. Up
4. Display
b) Use
• Aim the remote control directly at the product when using it.
• Make sure that there are no obstructions between the remote control and the appliance,
e.g. furniture, that could block the signal.
Setup and operation
Settings can be changed on the appliance's control panel (3) directly or using the remote
control supplied with the product
30 FORCECLIMA 9050
5. Down
6. Sleep
7. Mode button
8. Power button