Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Install face plate corners first (3a), then install the face plates
to shelf brackets using flat head screws (3b).
3a
5.
Install shelf supports. First align shelf support with tab located on under-
side of shelf bracket (3a). Insert end of shelf support into tab (3b). rotate shelf
support so it is flat against wall (3c). Mark the hole location, remove shelf
support and drill pilot hole with a 3/16" drill bit. Secure shelf support to wall
using washers and lag bolts (3d).
SHELF
BRACKET
3a
SHELF
SUPPORT
3b
If you have any questions, or you're missing parts,
call our customer care department: 1-800-297-8662
3a
FACE
PLATE
3b
3b
FACE PLATE
CORNER
3c
END OF
SHELF SUPPORT
4.
Snap shelf rods into shelf bracket grooves.
SHELF ROD
2
SHELF
SUPPORT
3d
Rev. 1
Publicidad
