Qlima H 824 Instrucciones De Uso página 47

3.
4.
5.
3. OPERATION
ON/OFF
HUMIDITY
AUTO
LIGHT
Plugging the device for the first time into the socket, LCD display will light up 1 second, then
only left"
When the machine is out of water, it will emit a tone for 5 seconds, then the water shortage
icon in the display will light up in red color.
ON/OFF
MIST
HUMIDITY
man_H824 ('21) V3.indd 47 man_H824 ('21) V3.indd 47
When the water tank is empty, the device switches off automatically, at the same time
the indicator light turns blue.
Add water after unplugging the power plug.
Turn off and unplug the humidifier before moving it otherwise the unit may not function
properly.
MIST
TIMER
ANION
LOCK
", the machine enter standby mode.
Press it to turn on the machine, led display shows
the current humidity and temperature. Atmosphere
lamp light up, the pump starts to draw water from
the tank up to the sink. lt will take 2.5 minute for
drawing up water, in this time, all functions can not
be operated. When the process of drawing water is
finished, machine will start to spray mist in level 2,
other functions can be operated normally.
Press it to select the fog spray level 1-3, keep
pressing for different gear positions. Led show the
selected level.
Press it to set up a constant humidity. Each time
the constant humidity function key is pressed,
the humidity is 5% RH increased, after reaching
the maximum humidity level, this function will
be turned off. Humidity adjustment range:
45%-95% RH. In the constant humidity state,
the machine stops working when the ambient
humidity reaches the set humidity. lf the ambient
humidity is less than the set up date of 5% RH or
more, the machine will resume working.
47
16-12-2021 17:17 16-12-2021 17:17