Marshalltown LWFS13 Manual página 6

3. Attach the Bed Brace (C) and Cutter Assembly (F)
using Hardware Set (K).
5. Attach the Bed (A) to the Cutter Assembly (F) using
Hardware Set (I) for the back and Hardware Set (H)
for the front.
7. Attach Handle (D) to the Handle Base using
Hardware Set (L).
6 of 12
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com
4. Attach the Leg (B) to the other side of the Bed
Brace (C) using Hardware Set (J).
6. Rotate the Handle Base on the top of the Cutter
Assembly (F) and insert the Locking Pin (G) into
the side.
8. Place the Bed Fence (E) into the holes on the right
side of the Bed (A).
WS2690revB