AKASO Brave 6 Plus Manual Del Usuario página 8

Time Lapse Photo Mode
Time Lapse Interval: 1 Sec/2 Sec/5 Sec/10 Sec/30 Sec/60 Sec
Default setting is 2 Sec.
Burst Photo Mode
In burst mode, several photographs are captured in quick succession, so it is perfect
for capturing fast-moving activities.
Burst Number: 3 Photos/5 Photos/10 Photos/15 Photos
Default setting is 3 Photos.
2. Resolution: 20MP/16MP/12MP/8MP
Default setting is 20MP.
3. Shutter Interval: Auto/1 Sec/2 Sec/5 Sec/10 Sec/ 20 Sec/30 Sec
Default setting is Auto.
Shutter Interval allows you to take photos with a delay of time.
4. Angle: Wide/Medium/Narrow
Default setting is Wide.
The angle refers to how much of the scene (measured in degrees) can be captured
through the camera lens. Wide angle captures the largest amount of the scene,
while Narrow angle captures the least.
5. Distortion Calibration: On/Off
Default setting is On.
6. Exposure: +2/+1.5/+1/+0.5/0/-0.5/-1/-1.5/-2
Default setting is 0.
By default, your camera uses the entire image to determine the appropriate
exposure level. However, exposure lets you select an area that you want the camera
to prioritize when determining exposure. This setting is particularly useful in shots
where an important region might otherwise be over- or underexposed.
11
7. ISO: Auto/100/200/400/800/1600
Default setting is Auto.
ISO determines the camera's sensitivity to light, and creates a trade-off between
brightness and resulting image noise. Image noise refers to the degree of graininess
in the image. In low light, higher ISO values result in brighter images, but with greater
image noise. Lower values result in lower image noise, but darker images.
8. White Balance: Auto/Daylight/Cloudy/Tungsten/Fluorescent
Default setting is Auto.
White Balance lets you adjust the color temperature of videos and photos to
optimize for cool or warm lighting conditions.
9. Meter Mode: Center/Average
Default setting is Average.
The metering mode refers to the way in which a camera determines exposure.
CAMERA SETTINGS
1. Upside Down: On/Off
Default Setting is Off.
2. Filter: Normal/Black and White/Brown/Colorful/Warm/Cold
Default setting is Normal.
3. Scene Mode: Auto/Personage/Scenery/Defog
Default setting is Auto.
4. Voice Control: On/Off
Default setting is Off.
When you turn on the Voice Control, the Voice Control icon
top of the screen.
will appear on the
12