Information And Obligations For The Operator; Impermissible Operating Conditions; Emissions - Relyon plasma Piezobrush PZ2-i Manual De Instrucciones

1.2

Information and obligations for the operator

•
The system may emit interference.
- The device has been tested in accordance with EMC legislation.
- The operator must verify and assure electromagnetic compatibility with other
electrical and electronic equipment in the immediate vicinity of the system.
•
Ensure that:
- Operating personnel have read and understood these operating instructions.
- Anyone working near the machine is made aware of the dangers and is provided
with the necessary protective equipment.
- Repairs are only carried out by qualified persons.
•
In particular, make operating personnel aware of the safety instructions in this
document.
•
Always keep the system in fully functional condition.
•
Any modifications made to the machine will invalidate the operating licence and the
warranty. Exception: Such modifications are expressly authorised by the manufacturer.
1.3

Impermissible operating conditions

The machine must not be operated under the following conditions:
•
In explosive (Ex) zones
•
In areas with severe build-up of dust
•
In environments where the air humidity is too high (see technical data, page 11)
•
At altitudes of more than 2,000 m above sea level
•
Where there are strong vibrations
1.4

Emissions

The plasma generator produces the following emissions:
•
Certain quantities of ozone (O
Plasma gas
Air
Nitrogen
Note!
As a precautionary measure, we recommend using an exhaust system with a flow volume
of approx. 10 times the amount of gas flow through the device in the immediate vicinity of
the plasma outlet.
). The workplace limit value may be exceeded. Example:
3
Gas flow
15 l/min
15 l/min
Ozone
< 0,18 g/h
< 0,13 g/h
Safety
7