Layout And Function; Ayout; Components Of The Logo! 8 Tp Edutrainer - Festo LOGO! 8 TP EduTrainer Manual De Instrucciones

9 Layout and function

9.1 Layout
The LOGO! 8 TP EduTrainer
Didactic equipment system. LOGO! is a modular mini control system. The LOGO! 8 TP EduTrainer
a LOGO! Basic with 8 integrated digital inputs and 4 digital outputs. Power is supplied by and external
24 V DC voltage source. 4 mm safety sockets are used as interfaces to the automated process.
The LOGO! 8 TP EduTrainer
benchtop device on the profile plate.

9.2 Components of the LOGO! 8 TP EduTrainer

The LOGO! 8 TP EduTrainer
•
LOGO! Basic with integrated inputs and outputs: 8 digital inputs, 4 digital outputs
The LOGO! 8 TP EduTrainer
© Festo Didactic 8045497
TP has been designed as a plug-in unit for the ER mounting frame of the Festo
®
can be installed to the mounting frame of the equipment system or used as a
®
®
consists of the following components
®
® TP is supplied fully assembled and tested.
1 Network socket
2 LOGO! Basic
3 LOGO! Basic display
4 LOGO! Basic control panel for LOGO!-programming
5 LOGO! Basic SD card slot
6 0 V-safety sockets
7 Safety sockets for inputs
8 24 V-safety sockets
9 Safety sockets for outputs
LOGO! 8 TP EduTrainer – Brief description
®
® consists of
25