Descargar Imprimir esta página

Wiring The Logo! 8 Tp Edutrainer; Installing The Logo! 8 Tp Edutrainer; Programming - Festo LOGO! 8 TP EduTrainer Manual De Instrucciones

Ocultar thumbs Ver también para LOGO! 8 TP EduTrainer:

Publicidad

Idiomas disponibles

Idiomas disponibles

LOGO! 8 TP EduTrainer
– Brief description
®
The following parts are not included in the scope of delivery:
Ethernet cable, order no. 567280
LOGO! Soft Comfort, order no. 8040050
Power supply unit 24 V DC, order no. 159382

9.3 Wiring the LOGO! 8 TP EduTrainer

The LOGO! 8 TP EduTrainer
Voltage must be supplied by and external 24 V DC voltage source. Festo Didactic power packs, which are
available as plug-in variants for the ER mounting frame or as benchtop variants, can be used for this
purpose.

9.4 Installing the LOGO! 8 TP EduTrainer

The LOGO! 8 TP EduTrainer
In the mounting frame of the Festo Didactic laboratory equipment system
On the profile plate or
As a benchtop device
One adapter set (order no. 541122) is required for use on the profile plate.

9.5 Programming

LOGO! can be programmed in two different ways:
Without a PC using the control unit of the LOGO! Basic
With a PC using LOGO! Soft Comfort programming software which is available to this end
We recommend using LOGO! Soft Comfort in order to program the LOGO!.
LOGO! Soft makes it possible to:
Create and load control programs (also known as switching programs)
Simulate control programs
Document and archive control programs
A detailed description of the program's functions can be found in the online help for LOGO! Soft Comfort.
26
®
®
must be supplied with voltage.
®
can be used:
®
© Festo Didactic 8045497

Publicidad

loading

Este manual también es adecuado para:

8040886