Rena Ware RWF-228 Manual De Uso Y Mantenimiento página 11

7. Place the diverter valve gasket in place.
8. Thread the diverter valve onto the faucet, "hand– tighten" only. Do not
overtighten as it could damage the threads. If the diverter valve is not
compatible with your faucet, try the adapters included, if they don't work,
contact Rena Ware Customer Service for assistance.
9. Insert one end of the inlet tubing into the socket on the back of the Filter Base,
pushing firmly to ensure it is seated correctly.
EN
11