Jocel JVA030658 Manual De Instrucciones página 23

Ventilador nebulizador
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• Place the Humidifier Power Base onto the Base.
• Remove the Fan Blade Nut (2) and the Rear Grille Lock Nut (4) from the Motor Shaft
Spindle (n).
• Fit the Rear Grille (5) by positioning it onto the location pins (p). Secure the grille (5) to
the Motor Body with the Grille Lock Nut (4). Note: The handle on the Rear Grille (5) must
face upward.
• Push the Fan Blade (3) onto the Motor Shaft Spindhe (n) by matching the Slots on the
Base of the Fan Blade with the Shape Pin (o).
• Secure the Blade (3) with the fan Blade Nut (2) by turning it COUNTER - CLOCKWISE.
Check that the fan blade rotates freely by turning it with your hand.
• Open securing clips around the front grille and loosen the clip screw at the top of the front
grille. Position the top clip on the uppermost part of the rear grille. Push the top clip down
and press rim of the front grille onto the rear grille. Close all the clips and tighten the
23

Publicidad

Tabla de contenido
loading

Tabla de contenido