Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung 650 Serie Manual Del Usuario

Getting Started
When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
Power Input
When the TV is initially powered on, a sequence of on-screen prompts will assist in confi guring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the red button.
1
Selecting a language
2
Selecting Store Demo
or Home Use
3
Selecting an antenna
4
Selecting a channel
5
Setting the Clock
Mode
6
Viewing the HD
Connection Guide.
7
Enjoy your TV.
If You Want to Reset This Feature...
O
m → Setup → Plug & Play → ENTERE.
MENU
6
English

Connecting to an Antenna

Plug & Play (Initial Setup)
Press the ▲ or ▼ button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
Select the Home Use mode. Store Demo Mode is for retail

environments.
To return the unit's settings from

(standard): Press the volume button on the TV. When you see the
volume in the OSD, press and hold
Press the ▲ or ▼ button, then press the ENTERE button. Select Air, Cable or Auto.
✎
In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the ▲, ▼, ◄ or ► button, then press the ENTERE button.
The channel search will start automatically.
For more information, refer to Channel → Auto Program. (P. 11)
✎
Press the ENTERE button at any time to interrupt the memorization process.
Press the ◄ or ► button to select Month, Day, Year, Hour, Minute or am/pm.
Set these by pressing the ▲ or ▼ button.
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
VHF/UHF Antenna
or
R-AUDIO-L P
R
Store Demo to Home Use
MENU for 5 sec.
Plug & Play
Time
Menu Language
Caption
Network
General
PIP
Wireless Remote Control : On
Cable
ANT OUT
P Y
B
POWER
P
MEDIA.P
: English
: Off
S.MODE
: Off