Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung 6 Serie Manual Del Usuario

Getting Started
When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
Power Input
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the red button.
1
Selecting a language
2
Selecting store Demo
or home Use
3
Selecting an antenna
4
Selecting a channel
5
Setting the Clock
Mode
6
Viewing the hD
Connection guide.
7
Enjoy your TV.
If You Want to Reset This Feature...
O
MEnU m → setup → Plug & Play → EnTERE.
6
English

Connecting to an Antenna

Plug & Play (Initial Setup)
Press the ▲ or ▼ button, then press the EnTERE button.
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the EnTERE button.
Select the home Use mode. store Demo Mode is for retail
y
environments.
To return the unit's settings from
y
(standard): Press the volume button on the TV. When you see the
volume in the OSD, press and hold
Press the ▲ or ▼ button, then press the EnTERE button. Select Air, Cable or Auto.
The channel search will start automatically.
For more information, refer to Channel → Auto Program. (P. 12)
✎
Press the EnTERE button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
The connection method for the best HD screen quality is displayed.
Press the EnTERE button.
VHF/UHF Antenna
or
R-AUDIO-L
store Demo to home Use
MEnU for 5 sec.
Plug & Play
Time
Language
Caption
Security
Network
General
PIP
Cable
ANT OUT
P P Y
R B
POWER
P
MEDIA.P
: On
S.MODE
: Off1