Hilti R 6-22 Manual Del Usuario página 14

1. Press the Bluetooth button.
2. To initially pair the radio manually, press the Bluetooth button and hold it down for 2 seconds.
▶ The Bluetooth symbol flashes.
▶ Select the Hilti radio on the mobile device.
▶ The devices have been successfully paired when the Bluetooth and pairing symbols both show
continuously in the display.
3. If the radio has already been paired to the mobile device, press the Bluetooth button.
▶ Pairing starts automatically and the pairing symbol on the screen starts to flash.
▶ The radio searches for a signal for a maximum of 3 minutes.
▶ The pairing symbol appears on the display to indicate that the devices are paired.
▶ The Bluetooth symbol appears in the display to indicate that the radio has found a paired mobile
device.
4. If you have a second radio, you can synchronize the two radios and listen to music in stereo.
▶ Radio (A) is connected to your mobile device. This radio is the master.
▶ Switch radio (B) on.
▶ On radio (B), press the Bluetooth button.
▶ On master radio (A), press the Preset button (an acoustic signal sounds to confirm that the connection
has been established).
▶ Shortly after, music will start playing in stereo on the two radios.
6.2 Making an NFC connection
1. Activate the NFC function on your mobile device (if it supports NFC).
2. Hold you mobile device close to the NFC interface of the radio. This is on the right-hand side and is
indicated by the NFC symbol.
You must accept the NFC connection on your mobile device when the connection is established
for the first time.
6.3 Setting the audio source
Press the mode button to select the audio source: AM, FM, AUX or Bluetooth.
1. Press the mode button.
2. Select the desired audio source. You can choose between AM, FM, AUX and Bluetooth.
6.4 Searching for and saving stations
Quickly turn the knob a short distance to start the automatic station search.
1. Use the knob to select a frequency.
2. Press the 'Preset' button.
3. Press the knob to save this frequency.
6.5 Positioning the antenna
▶ Swivel the antenna to the position at which reception is clearest.
6.6 Adjusting the volume
1. Turn the power button clockwise to increase the volume.
2. Turn the power button counterclockwise to reduce the volume.
6.7 Equalizer settings
This allows you to make adjustments to the bass and treble settings.
8 English
5
6
7
8
9
10
2309425
*2309425*