Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Note :
1. The iPod Player's battery is 80% charged in about an hour, and fully charged in
about a few hours. If you charge it while playing music, it may take longer.
2. It is not better to charge under the RADIO mode. It may interfere the reception.
Note:
1.
In any time, you can control the iPod player on the main unit, remote control or iPod
player itself while the unit in the "iPod".
2.
In any time, the iPod player must be fixed well under in the STANDBY mode to avoid
the unit and iPod player were damaged.
AUX IN PLAY
The AUX input is located at the rear of the unit (12). Use a 3.5mm stereo jack cable to connect
audio equipment through the LINE IN jack.
1. To select the AUX input function, repeatedly press the FUNCTION button on the unit (or
remote control) until AUX is indicated on the display.
2. Press the VOLUME (UP or DOWN) button to adjust the sound output level.
Note: LINE in cable not included.
MUTE SETTING (ON THE REMOTE CONTROL)
1. When you press the MUTE button (2) once on the remote control, the volume level will flash
and the audio output will be temporarily terminated.
2. Press the MUTE button again, the volume level and the audio output will return to normal.
DIMMER CONTROL
Press the Snooze / Dimmer button sequentially to select the desired intensity of backlight
illumination.
English
9
10
English
LCD DISPLAY WINDOW
H
I
A
C
D
A. AM/PM INDICATOR
G. FM BAND INDICATOR
B. SLEEPINDICATOR
H. iPOD iPHONE INDICATOR
C. TREBLE INDICATOR
I. RADIO INDICATOR
D. BASS INDICATOR
L. BEEP INDICATOR
E. ALARM 1 INDICATOR
M. AUX INDICATOR
F. ALARM 2 INDICATOR
TECHNICAL SPECIFICATIONS
Power Supply
AC:
230V-50Hz (EXTERNAL ADAPTER)
DC:
9V 1000 mA
BATTERY:
1 x CR-2032 battery for Remote Control
2 X UM3 battery for memory back-up
Frequency Reception
FM:
87.5 - 108 MHZ
General
Aux-IN:
3.5 mm plug 8-32 Ohm
Output Power:
Specifications subject to change without prior notice.
E
F
L
M
F
G
B
2 x 2 Watt
Publicidad
Tabla de contenido
