DeWalt DW194 Manual De Instrucciones página 6

384957/Drill 5/2/02 1:05 PM
OPEN TYPE BEARINGS
The open type bearings are open on one or both sides. Grease is
applied to these bearings at the factory, and further lubrication is
received from the grease in the gear case (if bearings are located in
this area). Roller, needle, and sleeve bearings all fall into the open
type classification.
Lubrication
D Walt tools are properly lubricated at the factory and are ready for
E
use. Tools should be relubricated regularly every sixty to 120 days
depending on usage. Tools used constantly on production or heavy
duty jobs and tools exposed to heat may require more frequent lubri-
cation.This should only be attempted by trained power tool repair
professionals such as those at your local authorized D
Center.
Some DeWalt power tools are equipped with an oil hole located in the
rear of the tool. Periodically, place a few drops of SAE #10W or 20W
motor oil in this hole.
Accessories
Recommended accessories for use with your tool are available at
extra cost from your distributor or local service center.
ACCESSORY MUST BE RATED FOR USE AT SPEED EQUAL TO
OR HIGHER THAN NAMEPLATE R.P.M. OF TOOL WITH WHICH IT
IS BEING USED.
If you need assistance in locating any accessory, please contact
D WALT Industrial Tool Company, 626 Hanover Pike, P.O. Box 158,
E
Hampstead, MD 21074 or call 1-800-4-D
CAUTION: The use of any non-recommended accessory may be
hazardous.
Important
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
Page 3
Walt Service
E
WALT (1-800-732-4441).
E
3
be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
Full Warranty
D WALT heavy duty industrial tools are warranted for one year from
E
date of purchase. We will repair, without charge, any defects due to
faulty materials or workmanship. For warranty repair information, call
1-800-4-D WALT. This warranty does not apply to accessories or
E
damage caused where repairs have been made or attempted by
others. This warranty gives you specific legal rights and you may have
other rights which vary in certain states or provinces.
In addition to the warranty, D WALT tools are covered by our:
E
30 DAY NO RISK SATISFACTION GUARANTEE
If you are not completely satisfied with the performance of your
D WALT heavy duty industrial tool, simply return it to the participating
E
seller within 30 days for a full refund. Please return the complete unit,
transportation prepaid. Proof of purchase may be required.
See 'Tools-Electric'
– Yellow Pages –
for Service & Sales