Auto-Zero Function; Reset To Factory Setting - KERN EMS Serie Manual De Instrucciones

Auto-Zero Use this function to enable or to disable the automatic zero position
function
0.0
g
AF
TR
TR Qn
0.0
g
Reset to factory This function resets all menu items to factory setting
setting
0.0
g
AF
RST
RST Qn
0.0
g
23
In weighing mode keep the UNIT key pressed until [AF]
appears.
Press the MODE key: „tr" is displayed.
Acknowledge using SET key, the current setting is displayed.
Select the desired settings by pressing the MODE key
Use the SET key to confirm selection. The balance returns to
weighing mode.
In weighing mode keep the UNIT key pressed until [AF]
appears.
Press the MODE key twice: „rSt" is displayed.
Acknowledge using SET key, the current setting is displayed.
Select the desired settings by pressing the MODE key
Use the SET key to confirm selection. The balance returns to
weighing mode.
EMS-BA-e-1112