En: Installation Sheet - Texecom Elite QD Hoja De Instalación

2.0 EN: Installation Sheet

Product description
The Premier Elite QD, TD, DT and CW are designed to detect movement of an
intruder and activate an alarm control panel. The product is intended to be
connected to a listed burglar compatible control unit or a power supply that has a
voltage output range of between 9 to 15 VDC and provides a minimum of 4 hours
of standby power.
1. Installation guidelines
The technology used in these detectors resists false alarm hazards. However, avoid
potential causes of instability such as
Not suitable for outdoor use.
2. Opening the detector
Unwind the screw at the base of the detector until loose; the screw will be
retained in the product
Lift detector lid out from the base and off the lugs at the top
2).
3. Mounting the detector
4. Premier Elite QD 5. Premier Elite TD 6. Premier Elite DT/CW
INS544-8 22/50
(see Fig.
(see Fig. 2, step1).
1).
(see Fig. 2, step