Step 15
Fasten three MAGNETIC SPACERS (7) to the BOTTOM
å
SPACER (J). Turn three 1/2" FLAT HEAD SCREWS (18)
through the MAGNETIC SPACERS and into the holes in
the BOTTOM SPACER.
Carefully stand your unit upright and place the
å
BOTTOM SPACER (J) onto the BOTTOM (B) with the
MAGNETIC SPACERS against the RIGHT END FRAME (L).
The angled edge of the
MAGNETIC SPACER
should be facing out.
Page 20
7
J
J
B
429405
OPENING ON THE LEFT
18
1/2" FLAT HEAD SCREW
(3 used in this step)
L
whiskersupport.com