Beacon Lighting LUCCI PFC56-3B-ABS-US Serie Instrucciones De Instalación página 5

Airfusion Whitehaven Installation Instructions
INSTALLATION OF BLADE (Fig. 6)
•
Remove the ball joint (1) by loosening the set screw (2). Fig.6
•
Remove the canopy (3) and the motor housing (5) from the down rod (4).
•
Secure the blade (7) to the blade holder (8) by tightening the 3 blade screws (6).
•
Repeat to install the other blades to the blade holders.
NOTE: Don't run the motor without blades installed!
•
Reinstall the motor housing and the canopy to the down rod. Fig. 7
•
Secure back the pin and the ball joint to the down rod. Fig.7
4 | P a g e
INSTALLATION OF THE FAN
Fig. 6
Fig. 7