Using Your Ceiling Fan - Beacon Lighting LUCCI PFC56-3B-ABS-US Serie Instrucciones De Instalación

Airfusion Whitehaven Installation Instructions
NOTE: The remote and receiver will need to be paired after the installation of the ceiling fan.
NOTE: When two or more ceiling fans are installed in one location, please refer to the
instruction on the next page.
BATTERY INSTALLATION （Fig. 15）
BEFORE USING THE REMOTE TRANSMITTER
1 pc 3V CR2032 battery is required to operate the remote control.
1. Battery CR2032 is pre-installed in the remote. For first time use of the remote, remove the battery film before use.
(Fig. 15 a)
BATTERY REPLACEMENT FOR THE REMOTE TRANSMITTER
1. To replace a new battery, Press the top of the battery compartment cover and loosen the screw in the same time
further to remove the battery compartment cover (Fig. 15 b).
Note: Screw does not come apart from the battery compartment cover. Do not force the screw and battery
compartment cover apart.
Slide to remove the battery compartment cover from the back of the remote, to access the battery (Fig. 15b)
2.
8 | P a g e

USING YOUR CEILING FAN

Battery film
Battery film
Fig. 15b
Fig. 15a