Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Quick installation guide
You can download the complete operating instructions on
https://www.sedea-pro.fr/support-technique/
Installation
This autonomous WiFi camera is designed with a waterproof housing (IP 64
index) allowing you to install it both indoors and outdoors. Before installing
it, make sure that your WiFi signal is accessible at the desired location. If
the camera is installed outdoors, it is advisable to place it under a shelter in
order to improve the quality of the image (raindrops can sometimes impair
visibility).
Step 1 : Recharging the batteries
Please fully charge the camera batteries before installing/using the camera.
Use the supplied Micro USB cable to connect the camera to a USB
power supply (not included). To obtain the correct charging time, it is
recommended to use a USB charger of 1A or more. Once plugged in, the
camera indicator lights red, and the batteries are fully charged when the
indicator turns green.
Publicidad
Tabla de contenido
