SEDEA 518600 Guía De Instalación Rápida página 12

Step 3 : Installing a Micro SD card
Note : If you do not wish to use a Micro SD card for recording, you can go
directly to step 4.
The Micro SD card reader (2), is located underneath the batteries.
Remove the batteries and insert your Micro SD card :
1
- Push the latch downwards to unlock and open it
- Place the Micro SD card in its slot
- Close the latch again and push it upwards to lock it
ATTENTION : Do not force, the latch must close and lock easily. If the lock
is broken, remove the Micro SD card and replace it correctly.
Step 4 : Switching on the camera
2
Press the ON/OFF button : an audible
signal sounds and then a voice confirms
that the camera is ready to be paired (the
camera is ready to pair).
You
waterproof housing and then reposition
the locking button to the «closed»
position :
3
can now close
4
the camera's