Publicidad
Idiomas disponibles
Idiomas disponibles
Parts:
7
To Assemble
WARNING: To avoid damage to the product or serious personal
injury:
• DO NOT activate or plug the product into an electrical outlet until the
product is completely assembled.
• The Blades of the product are very sharp. Handle with care.
1. Ensure the product is unplugged from the electrical outlet.
2. Place the Motor Housing on a flat, stable surface.
3. Wash and dry the Glass Jar.
4. Ensure the Leak-Proof Rubber Gasket is attached around the Spin
Base.
5. Insert the Blades and Spin Base into the bottom of the Glass Jar
and turn clockwise until the Glass Jar and the Spin Base lock into
place.
6. Place the Glass Jar onto the Motor Housing. Ensure the Motor
Drive Coupling and the fittings located on top of the Motor Housing
are aligned and that the Blade Assembly/Spin Base of the Glass Jar is
securely in place inside the Motor Housing.
7. Place the Plastic Lid on top of the Glass Jar and secure it into
position.
To Use
1. Wash the ingredients you want to blend and cut them into pieces
small enough to fit into the Plastic Lid Feeding Hole.
2. Once cleaned and cut, add the ingredients into the blender through
the Plastic Lid Feeding Hole.
NOTE: The Glass Jar has a six cup (48 oz. / 1.5 liter) capacity. Do
not overload the Glass Jar with ingredients.
1
1. Plastic Lid with Feeding Hole
2
2. Glass Jar
3. Leak-Proof Rubber Gasket
4. Blade Assembly/Spin Base
5. Motor Drive Coupling
3
4
6. Motor Housing
5
7. 10-Speed Panel Control
6
5
Publicidad
