Publicidad
Idiomas disponibles
Idiomas disponibles
DO NOT
•
immerse in or expose the base, power cord, or plug to water or other liquids.
DO NOT
•
attempt to open any part of the base.
• To disconnect the product from an electrical outlet, pull directly on the plug; do not pull on
the power cord.
DO NOT
•
put any stress on the power cord where it connects to the product, as the power
cord could fray and break.
• If using an extension cord with this product, the marked electrical rating of the cord set or
extension cord must be at least as great as the electrical rating of the product.
• Keep hands and utensils out of container while blending to reduce the risk of severe injury
to persons or damage to the blender.
DO NOT
•
operate the product if it has a damaged power cord or plug, malfunctions, or is
dropped or damaged. This product has no user-serviceable parts.
examine or repair this product yourself. Only qualified service personnel should perform any
servicing. Take the product to the appliance repair shop of your choice for inspection and
repair.
CAUTION- To reduce the risk of personal injury or product/property damage:
• This product is intended for use in blending food products.
any other purpose.
• Keep the product out of the reach of children and pets. This product is not intended for use
by children.
DO NOT
•
leave the product unattended while it is in use, especially when children are
present. Extra caution is necessary when using this product near children. Always unplug
the product from the electrical outlet when it is not in use.
DO NOT
•
use attachments, including canning jars, not recommended or sold by the
manufacturer. The use of attachments, including canning jars, not recommended by the
manufacturer may cause a risk of injury to persons.
• This product contains exposed sharp metal blades. Use extreme caution when handling.
• Avoid contact with moving parts.
ALWAYS
•
operate blender with cover in place.
ALWAYS
•
operate the product on a flat, level, stable surface to avoid overturning it.
• Ensure the blender is off before adding or removing parts.
Glass Jar onto the Base while the motor is running.
Jar from the Base while the motor is running.
• Attach the Blade Assembly to the Glass Jar correctly before putting the Glass Jar onto the
Base. To reduce the risk of injury, NEVER place cutter- assembly blades on the base
without the Glass Jar being properly attached.
DO NOT
DO NOT
DO NOT
attempt to remove the Glass
3
DO NOT
attempt to
use the product for
attempt to place the
Publicidad
