Assembly - Tripp-Lite SRWOSHELFSM Manual Del Propietário

Assembly

WARNING: Do not attempt to mount the rack to the wall with
equipment mounted to the rack.
WARNING: The wall surface, the wall studs and all user-supplied mounting hardware must be able to support
the combined weight of the rack and all equipment that will be installed in the rack.
Note: Recommended torque for tightening all M5 screws is 35 in•lbf (3.9 N•m).
Step 1 Using two M5 X 8 mm screws in the front and
middle position, attach the Left Panel to the Base Panel.
Step 3 Using eight M5 X 8 mm screws (three per side and
two at the bottom rear), attach the Rear Panel to the Base
Panel.
Step 2 Using two M5 X 8 mm screws in the front and
middle position, attach the Right Panel to the Base Panel.
SRWOSHELFLG Model Only Using six M5 X 8 mm
screws, attach the Top Shelf.
3