Phottix Odin TTL Manual De Instrucciones página 14

Connecting a ash to the Odin
receiver to studio lights or ashes
by cable
1. Turn o the ash/strobe and the Phottix Odin
receiver.
2. Connect a cable to the receiver's 3.5 mm
Output Port.
3. Connect the opposite end of the cable to a
ash or studio strobe (A 6.3 mm adapter is
included for studio strobes).
4. Turn on the ash/strobe and the Phottix Odin
receiver.
5. Set the ash to Manual mode – no TTL
functions can be used when a compatible ash
is triggered by cable.
14