Loewe klang sub1
Important safety instructions
1
Important safety
instructions
Attention: Read this page carefully to
ensure safe operation of the device.
Follow all safety and operating instruc-
tions when using this product.
You should keep the safety and opera-
ting instructions for future reference.
You should strictly follow all warnings
provided on the product and listed in
the operating instructions.
Explanation of symbols
Double Insulated (Class II) Equipment.
This electrical appliance has been
designed in such a way that it does not
require a safety connection to electrical
earth (ground).
This symbol indicates risks caused by
high voltages.
This symbol is to alert the user to other,
more specific risks.
This symbol indicates dangers caused
by the development of fire.
1.1
Installation
1.1.1
Placement
Place the unit on a stable, even surface.
1.1.2 Cables
Lay the power cable in such a way that
it cannot be damaged. The power cable
may not be kinked or laid over sharp ed-
ges, stood on or exposed to chemicals;
the latter also applies to the system as
a whole. A power cable with damaged
insulation can cause electric shocks
and poses a fire risk. As such, it must be
changed before the unit is used again.
1.1.3 Do not use this device near
water
The device should never be exposed to
water droplets or water splashes, such
as those found near a bathtub, wash
basin, kitchen sink, washing machine,
wet basement or swimming pool. Never
place containers filled with liquids, such
as e.g. flower vases, on the device.
7
1.1.4 Ventilation
Slots and openings in the housing are
used to ventilate the device to ensure
reliable operation of the device and to
protect the device from overheating.
Do not block the ventilation holes. Install
the device according to the manufactu-
rer's instructions. Never block the ven-
tilation holes by placing the device on a
bed, sofa, rug, or similar soft surfaces.
This device should not be installed in a
bookshelf or built-in wardrobe unless
adequate ventilation is ensured.
1.1.5 Heat
Do not install the device near hot sur-
faces, such as radiators, fan heaters,
stoves or other devices (including
amplifiers) that can be hot. Never place
objects with open flame, such as cand-
les or lanterns, on or near the device.
1.1.6 Accessories
Use only the accessories specified by
the manufacturer.
1.2
Usage
1.2.1 Intended use
This device is intended exclusively for
the reception and playback of sound
signals.
1.2.2 Overload
Never overload mains sockets, extensi-
on cords or multiple sockets, otherwise
there is a risk of fire or electric shock.
1.2.3 Thunderstorm
The device should be disconnected
from the mains during thunderstorms
and if it is not used for a long time.
1.2.4 Penetration of foreign material
and liquid
Be careful not to allow foreign material
or liquid to enter this device through
ventilation holes, otherwise it may come
into contact with high voltage compo-
nents or short circuit resulting in a fire
or electric shock. Never spill liquids of
any kind on this device.
1.2.5 Risks associated with high
volume
The device is not designed for listening
with headphones. To prevent possible
hearing damage, do not listen at high
volume for long periods.
1.2.6 Disconnection from power
supply
To completely disconnect the device
from the mains, unplug the mains cable
from the socket.
The mains plug must be easily accessi-
ble so that the unit can be disconnected
from the mains at any time.
1.3
Maintenance
1.3.1 Device maintenance
Never attempt to carry out the mainte-
nance of this device yourself, because
live parts can be exposed through the
openings or by removing covers, con-
tacting which can be hazardous. Leave
all maintenance to qualified service
personnel.
1.3.2 Clean only with a dry cloth!
Unplug the mains adapter of this device
from the mains socket before cleaning
this product. Never use liquid cleaning
detergents or cleaning sprays. Use only
a damp cloth for cleaning.
1.4
Repair
1.4.1 Damages requiring repair
Maintenance and repair work should
only be carried out by a qualified
customer service. Maintenance/re-
pair is required if the device has been
damaged (e.g. the mains adapter) if
liquid has entered the device, if objects
have entered the device, if the device
has been exposed to rain or moisture,
when it stops working properly or has
fallen down.
1.4.2 To minimize the risk of electric
shock, fire, etc.
Do not remove screws, covers or body
parts.
EU Declaration of Conformity
Hereby, Loewe Technology GmbH declares
that the radio equipment type Loewe klang
sub1 complies with Directive 2014/53/EU. The
full text of the EU declaration of conformity
is available at the following Internet address:
https:/ /www.loewe.tv/int/support