Probuilder 18102 Manual De Instrucciones página 29

How to operate earmuff s with
Function 1
1. Bluetooth On/off
Press and hold the "On/Off " switch for 3
seconds, the Bluetooth function is turned on.
The indicator light is red (on for 1 second);
likewise, press and hold the "On/Off " switch
for 3 seconds to turn off the Bluetooth
function.
2. Pair-able status and empty paired list
Press and hold the "On/Off " switch for 6
seconds while in the off state, or press and
hold the "Play" button for 3 seconds to
disconnect when connected. The earmuff s
is into pair-able state , and the Bluetooth
indicator � ashes blue rapidly.
When the earmuff is in pair-able state, it can
be found and paired by other devices such
as mobile phones. The device name of the
earmuff is: "J&Y01".
Successfully paired devices will be saved in
the list.
In the pair-able state, press and hold the
"Volume-" and "Volume+" buttons for 5
seconds at the same time, which will clear
the paired list, and the indicator will light red
for 2 seconds.
3. Unconnected State and Connected State
When the earmuff is not connected to
Bluetooth (the indicator � ashes red every 5
seconds), if there is a device in the pairing
list, the headset will actively connect to the
device. The indicator light � ashes blue every
10 seconds after the headset is connected to
the device or while it is working.
4. Call function and Control
When the earmuff is connected to Bluetooth,
double-click the "Play" button to re-draw the
last dialed number; When the earmuff s is in
the outgoing call, click the "Play" button to
cancel the external pullout.
When the earmuff is ringing, click the "Play"
button to answer the call, and press and hold
the "Play" button to reject the call.
When the earmuff is in a call, click the "Play"
button to cancel the current call, double-click
the "Play" button to switch between "Use the
phone to talk" and "Talk with the headset",
and click the "Volume +/-" button to increase/
decrease the call volume;
When the earmuff is in conversation with 1#,
2# call, click "play" button to keep 1# call and
answer 2# call, long press "play" button to
reject answer 2# call.
When the earmuff is in a three-way call, press
and hold the "Play" button to switch between
1# and 2#, and click "Play" to cancel the
current call.
5. Play Music and Control
When the earmuff is connected, click the
"Play" button to play music. During play
status, click the "Play" button to pause;
When the headset is playing music, click the
"Volume+"/ "Volume-"button to increase
/decrease the volume, long press the
"Volume+"/ "Volume-" button to play the
next song/ to play the previous one.
6. Bluetooth Under-voltage Prompt
Function and Automatic Shutdown
When the Bluetooth function is turned on,
and the battery power is low, the indicator
light � ashes red every 10 seconds, and a
"beep" sound is sounded every 2 minutes.
After the battery is exhausted or the pairing
time exceeds 5 minutes, the Bluetooth will
automatically Shut down.
GB
29