Environmental Protection - PYD Electrobombas XKS900 Serie Manual De Instalación Y Mantenimiento

OPERATING AND MAINTENANCE MANUAL
XKS900 SERIES SUBMERSIBLE ELECTRIC PUMP
(2) Engine is humming but not running:
•
Pump is blocked by an external object. Clean the pump.
(3) Pump is not pumping properly:
•
The head is too high. Observe the maximum head height in the technical specifications.
•
Discharge hose is kinked. Straighten the discharge hose.
•
Discharge hose is punctured. Seal the hose and tighten the screw connections.
4) The pump makes a lot of noise when it starts up:
•
Make sure there is enough water in the supply. Set the level switch correctly. Keep the pump at an
angle when submerged.
5) Pump turns on continuously:
•
The level switch does not reach the lower position. Make sure that the level switch can be moved
without restriction.
7. REPAIRS
Repairs to the pump must be carried out by a qualified technician. In the event that the pump needs to
be repaired, it can be sent to an authorised service centre in your city. Please include with the pump a
description of the electrical fault for the technician.

8. ENVIRONMENTAL PROTECTION

The pump casing is made of 80% recycled material.
The pump mechanisms consist of a considerable number of raw materials and plastics, which can be
recycled.
These instructions are printed on chlorine-free bleached paper.
www.proindecsa.com / proindecsa@proindecsa.com
13