Baking Bread - Silvercrest SBB 850 A1 Instrucciones De Uso

Ocultar thumbs Ver también para SBB 850 A1:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Note:
NEVER use quantities larger than those specified. Too
much dough could rise out of the baking mould ¶
drop onto the hot heating elements and cause a fire.

Baking bread

Preparation
Pay heed to the safety instructions in this manual.
Place the Bread Baking Machine on a level and
firm surface.
Pull the baking mould ¶ upwards and out of
1.
the appliance.
Push the kneading paddles ² onto the drive
2.
shafts in the baking mould ¶. Make sure they
are firmly in place.
3.
Place the ingredients for your recipe into the
baking mould ¶ in the specified order. First
add the liquids, sugar and salt, then the flour,
adding the yeast as the last ingredient.
Note:
Ensure that the yeast does not come into contact
with salt or fluids.
Place the baking mould ¶ back in the appliance.
4.
Ensure that it engages correctly.
5.
Close the appliance lid
6.
Insert the power plug into the wall socket.
A signal tone sounds and in the display
appears the Programme number and the time-
duration for Programme 1.
7.
Select your programme with the Programme
select button
. Each input is confirmed with
a signal tone.
.
- 49 -
8.
If necessary, select the size of bread you want
to bake with the button
9.
Select the browning level
In the display
you have selected, light, medium or dark.
Here you can also select the setting "Rapid"
to shorten the time period in which the dough
rises.
Note:
A browning level cannot be selected with the
programmes 6, 7 and 11.
The function "Rapid" is only available with
Programmes 1-4.
A bread weight level cannot be selected with the
Programmes 6, 7, 11 and 12.
10. You now have the option of setting the end time
of your programme using the timer function.
You can enter in a maximum time delay of up
to 15 hours.
Note:
This function is not available for Programme 11.
Starting the Programme
Now start the programme with the Start/Stop button
.
Note:
The Programmes 1, 2, 3, 4, 6, 8 and 9 start with
a 10 to 30 minute pre-heat phase (except Rapid,
see Table for Programme Sequences). The knea-
ding paddles ² do not move themselves. That is
not an error of the machine.
.
for your bread.
the arrow shows you what

Publicidad

Tabla de contenido
loading

Tabla de contenido