Autoadapt Turny Low Vehicle Manual De Instalación página 27

Install the bracket in the vehicle
1
Install all console legs in OEM seat attachment in the floor. Use a
spacer to compensate for mat thickness.
2 Fit the brackets to the application tool again and put it back into
the intended position in the vehicle.
Mark where the hole for each bracket leg will be drilled into the
brackets. Next, remove the brackets from the application tool and
drill. Use 9 mm drill.
Inclined floor 4°
Spacers between 5-45 mm height are available to
buy as accessories. Contact Autoadapt Support for
further help.
All manuals and user guides at all-guides.com
1
Use a spacer to compen-
sate for mat thickness.
Getting seated Turny Low Vehicle
Horizontal spirit level
On
On
2
Mark out where holes for all
bracket legs will be drilled
into the bracket.
27
EN