viceroy VD-53B Manual Del Usuario página 8

01_VD53_NOV_2010.qxd:Maquetación 1 24/2/11 10:52 Página 8
"A"
RESET TIME MEASUREMENT STOP
"A"
"B"
"B"
This procedure shoud be performed when the chronograph second hand
do not return to the 0 second position after the chronograph has been reset,
and including after the battery has been replaced.
1. Pull the crown out to the 2nd position.
2. Press button "A" to set the chronograph second hand to the 0 position.
3. The chronograph hands can be advanced rapidly by continuously pressing button "A"
4. Once the hands have been zeroed, reset the time and return the crown to its normal
position.
* Do not return crown to normal position while chronograph second hand
return to 12:00 (ZERO) position.
Hand stops on the way when crown are returned to normal position and these positions are
recognized as 12:00 (ZERO) position.
8