Commissioning; Temperature Monitoring; Setting Up - Festool SYSLITE STL 450 Manual De Instrucciones Original

English
7

Commissioning

WARNING
Unauthorised voltage or frequency.
Risk of accidents
► Observe the specifications on the
machine's name plate.
► Observe country-specific regula­
tions.
WARNING
Electric shock caused by penetrat­
ing moisture.
Physical injury and damage to the
mains plug.
► Do not insert the mains plug in the
socket if the surroundings are
damp.
7.1 Switching on/off [1-1]
Switching on
► Unwind the power cable from the
cable holder[1-4].
► Insert the mains plug.
► Press the on/off switch[1-1].
Switching off
► Press the on/off switch [1-1] again.
► Pull out the mains plug.
► Wind the power cable onto the cable
holder[1-4].
7.2

Temperature monitoring

When the permissible operating tem­
perature range is not reached/is ex­
ceeded, the grazing light switches itself
off.
6
8

Setting up

The grazing light has a range of
8-13/64 ft (2.50 m). When this range is
exceeded, uneven surfaces may not be
reliably detected.
To ensure the surface is perfectly illu­
minated, position the grazing light at a
90° angle to the surface [2].
The grazing light can illuminate various
target surfaces:
[3 A] Floor -> section
[3 B]
Wall -> section
+[3 C] section
[3 D] Ceiling -> section
[3 E] Inclined surfaces -> sec­
tion
2
90°
3A
8.1
8.1 and
8.2
8.2
8.2
90°