Metabo HPT RB 18DC Instrucciones De Seguridad Y Manual De Instrucciones página 17

(2) Mounting the NozzIe
Insert the pin located outside the nozzle into
the groove provided on the suction port, and
fully turn the nozzle toward the arrow in Fig. 12
until a click is heard.
Groove
Pin
SWITCH AND AIR VOLUME CONTROL
○ Switch operation (Fig. 13).
When the switch
blower/vacuum cleaner rotates. When the
switch is released, the blower/vacuum cleaner
stops.
The volume can be adjusted for a variable
amount depending on how much the switch is
drawn in.
○ Continuous operation (Fig. 13)
Draw the switch as far as it goes and press the
ON lock button to lock in place the operating
state of the tool for continuous operation.
The ON lock button can be activated by
pressing either side of the switch.
To discontinue operation, draw the switch in
once again to release the ON lock button.
ON lock button
Suction port
Nozzle
Fig. 12
is depressed,
Switch
Fig. 13
○ Air volume control function (Fig. 14)
When the switch is fully drawn, the air volume
can be adjusted to High, Medium, or Low.
Lever position
3
2
1
Air volume changing lever
the
NOTE
During operation, the unit can generate static
electricity which may cause the motor to stop.
This is a protective feature and not a
malfunction. Draw the switch in once again to
restart the motor.
English
Air volume
High
Medium
Low
Fig. 14
17