Metabo HPT RB 18DC Instrucciones De Seguridad Y Manual De Instrucciones página 20

English
Problem
The USB power lamp
has switched off and the
USB device has stopped
charging.
USB power lamp does
not switch off even
though the USB device
has fi nished charging.
It is unclear what the
charging status of a USB
device is, or whether its
charging is complete.
Charging of a USB
device pauses midway.
Charging of the USB
device pauses midway
when the battery and the
USB device are being
charged at the same
time.
Charging of the USB
device doesn't start
when the battery and the
USB device are being
charged at the same
time.
20
Possible Cause
The battery's capacity has become
low.
The USB power lamp lights up green
to indicate that USB charging is
possible.
The USB power lamp does not switch
off even when charging is complete.
The charger was plugged into an
electrical socket while the USB device
was being charged using the battery
as the power source.
A battery was inserted into the
charger while the USB device was
being charged using a power socket
as the power source.
The battery has become fully charged. This is not a malfunction.
The remaining battery capacity is
extremely low.
Possible Solution
Replace the battery with one that has
capacity remaining.
Plug the charger's power plug into an
electric socket.
This is not a malfunction.
Examine the USB device that is
charging to confi rm its charging
status.
This is not a malfunction.
The charger pauses USB charging
for about 5 seconds when it is
diff erentiating between power
sources.
The charger pauses USB charging
for about 5 seconds while it checks
whether the battery has successfully
completed charging.
This is not a malfunction.
When the battery capacity reaches
a certain level, USB charging
automatically begins.