Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
●
To avoid injury from an accidental start, turn the switch OFF and remove the plug from the
power source or remove the battery from the main body before making any adjustments.
●
All electrical or mechanical repairs should be done only by qualifi ed service technicians.
Contact metabo HPT Authorized Service Center.
1.
Power tool
Symptom
Tool doesn't run
Tool suddenly stopped
Poor suction
Battery cannot be
installed
2.
Charger
Problem
The charge indicator
lamp rapidly fl ickers
purple, and battery
charging doesn't begin.
The charge indicator
lamp blinks red, and
battery charging doesn't
begin.
Battery usage time is
short even though the
battery is fully charged.
The battery takes a long
time to charge.
TROUBLESHOOTING GUIDE
Possible cause
No remaining battery power
The battery is overheated.
Dust bag is full.
Nozzle is plugged.
Nozzle is cracked or damaged.
Attempting to install a battery other
than that specifi ed for the tool.
Possible Cause
The battery is not inserted all the way. Insert the battery fi rmly.
There is foreign matter in the battery
terminal or where the battery is
attached.
The battery is not inserted all the way. Insert the battery fi rmly.
The battery is overheated.
The battery's life is depleted.
The temperature of the battery,
the charger, or the surrounding
environment is extremely low.
The charger's vents are blocked,
causing its internal components to
overheat.
The cooling fan is not running.
Remedy
Charge the battery.
Let the battery cool down.
Dispose the dust.
Remove the obstruction.
Exchange the unit with a new one.
Please install BSL36A18.
Possible Solution
Remove the foreign matter.
If left alone, the battery will
automatically begin charging if its
temperature decreases, but this may
reduce battery life. It is recommended
that the battery be cooled in a well-
ventilated location away from direct
sunlight before charging it.
Replace the battery with a new one.
Charge the battery indoors or in
another warmer environment.
Avoid blocking the vents.
Contact a metabo HPT Authorized
Service Center for repairs.
English
19
Publicidad
Tabla de contenido
