Use Instructions - Tripp-Lite U442-DOCK17-GY Manual Del Propietário

Use Instructions

1. Connect the built-in USB Type-C cable (male) to the target host.
2. Connect an HDMI-compliant external monitor with a user-
supplied HDMI cable, such as Tripp Lite's P569-Series.
Note: The USB-C source must support DisplayPort Alt Mode.
3. Connect up to two USB peripheral devices.
Note: Host must support USB On-the-Go (OTG).
4. Connect either your host's power supply or a USB-C
peripheral device to the USB PD Charging/Data port.
5. Connect a 2.5" SATA3 SSD/HDD referencing the instructions below.
a. Open the top cover by holding the main body with one hand
-01-238-933DDD-Book.indb 6 -01-238-933DDD-Book.indb 6
and the cover with the other and rotate counterclockwise.
Counterclockwise
6
7/8/2021 3:51:18 PM 7/8/2021 3:51:18 PM