Tabla de contenido
Publicidad
7.7 Botón de desplazamiento
Al presionar el botón durante 1, 3 o 5 segundos, pasará por todas las páginas de datos una por una..
Total active energy
Botón de desplazamiento: presione el botón durante menos de 3 segundos para desplazarse. Después de 30 segundos sin interacción, el
medidor vuelve al modo de desplazamiento automático
Current direction
Total active energy
Total reactive energy
Sostene
r el
botón
para 3
segund
os para
introdu
Active power
cir el
menú
siguient
e.
Sostene
r
el
botón
durante
Resettable kWh
3
segund
os para
volver .
Display
Shows:
Program mode 1
(read only)
or
Program mode 2
(write)
Hold
Program mode 3
the
(write: password
button
protected)
for 3
seconds
and
enter 4
digit
pass-
word
to
enter
program
mode.
Desplazamiento automático: predeterminado 10 segundos
Active power
Current direction
Program verify sum
Total active energy
Total forward
Total reverse
active energy
active energy
Total reactive energy Total forward
Total reverse
reactive energy
reactive energy
Voltage
Current
Frequency
Resettable kWh
Mantenga presionados los botones
durante 5 segundos para reiniciar.
LCD cycle time
Backlight
S0 output
Parity
Power down
counter
LCD cycle time
Scroll with the button to
select 1-30. Hold the button
for 3 seconds to confirm.
S0 output
Combination code
Baud rate
Scroll with the
Scroll with the
Scroll with the
button to select
button to select
button to select
10.000/2.000/
01(F)/04(R)/
300/600/1200/
1.000/100/10/
05(F+R)/06(R-F)/
2400/4800/9600.
1/0,1/0,01.
09(F-R)/10(F-R).
Hold the button
Hold the button
Hold the button
for 3 seconds
for 3 seconds
for 3 seconds
to confirm.
to confirm.
to confirm.
Serial number
T1 forward
T1 reverse
active energy
active energy
T1 forward
T1 reverse
reactive energy
reactive energy
Active power
Reactive power
Combination code
Modbus/M-bus ID
Backlight
Modbus/M-bus ID
Scroll with the button to
select on/off/button. Hold
the button for 3 seconds
to confirm.
Parity
Power down counter
Scroll with the
Hold the button
button to select
for 3 seconds
even/none/odd.
to reset.
Hold the button
for 3 seconds
to confirm.
PRO1-2T, PRO1-MB & PRO1-MOD
PRO1-MB & PRO1-MOD
PRO1-MOD
Hold
the
right
button
for ≥5
seconds
to add
T2 forward
T2 reverse
or
active energy
active energy
remove
from
the
auto-
matic
scroll.
T2 forward
T2 reverse
reactive energy
reactive energy
Display
Shows:
Apparent power
Power factor
or
Baud rate
Resettable kWh
Scroll with the button to
select 3 digits. Confirm
each digit by holding the
button for 3 seconds.
Hold
the
right
Password
button
for ≥5
seconds
to
enter
program
Select the new
mode.
4 digit password
by choosing each
digit (0-9). Confirm
each digit by holding
the button for
3 seconds.
Inepro Metering - PRO1 Series - 13
Publicidad
Tabla de contenido
