ErgoAV ERTSX1-01B Manual De Instrucciones página 10

Supplied Part and Hardware for Step 4
NOTE: The
bolt is shown
in actual size
Step 4 Attach Support Pillar [03] to the TV and Manage the Wires
NOTE: Before attaching the support pillar [03] to the TV, measure the
distance from the bottom end of the TV Bracket to the bottom of the TV.
Then refer to chart below for the recommended mounting location. To add an
additional 2" of space between your TV and the base, use the lower hooks
located on the TV Brackets. We always recommend using the lowest possible
attachment location for the safest assembly.
Distance from the bottom of TV Brackets to the
bottom of the TV
Less Than 0 (TV Bracket is beyond the TV bottom)
(A) x4
M5x12mm Bolt
0 to 1 1/5"
1 1/5" to 3 1/5"
3 1/5" to 5 1/5"
Recommended Mounting
Location
10
(F) x1
5/32in(4mm)
Allen Key
Location #1
Location #2
Location #3
Location #4