ErgoAV ERTSX1-01B Manual De Instrucciones página 13

Step 5B
For Wooden Stud Installation
●
DO NOT USE ANCHOR [Z4] FOR THIS STEP!
X
● Any material covering the wall must not exceed 5/8in(16mm)
● Nominal wood stud size: common 2 x 4in(51 x 102mm)
minimum 1½ x 3½in(38 x 89mm).
● Stud center must be verified by using an awl or stud finder.
Pencil
(Not lncluded)
Z3
Z1
OR
Awl
(Not lncluded)
NOTE: Each strap must be
mounted to a separate stud.
Stud Finder
(Not lncluded)
13
1/8in(3mm)
1/8in(3mm)
Wood Drill Bit
Phillips Screwdriver
(Not lncluded)