Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Dimensions
(L x W x H)
Traveling speed
Minimum turning radius
Maximum climbing capacity
Maximum load capacity
Brake
Tire
Rated voltage
Standard battery cartridge
Charger
Net weight
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications and battery cartridge may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or BATTERY-
operated (cordless) power tool.
Work area safety
1.
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
When carrier is installed
When bucket is installed
Forward
Reverse
Front wheel
Rear wheel
Front wheel
Rear wheel
When carrier is installed
When bucket is installed
During operation: 1,560 mm x 1,060 mm x 900 mm
(61-1/2" x 41-3/4" x 35-1/2")
When stored: 1,110 mm x 670 mm x 820 mm
(43-3/4" x 26-3/8" x 32-1/4")
During operation: 1,310 mm x 790 mm x 900 mm
(51-1/2" x 31-1/8" x 35-1/2")
When stored: 1,110 mm x 590 mm x 820 mm
(43-3/4" x 23-1/4" x 32-1/4")
1.5 or 3.5 km/h (0.9 or 2.2 mile/h)
1.0 km/h (0.6 mile/h)
1,075 mm (1.2 yard)
(Outer diameter when turning with front wheel as axis)
Disc brake with wire
BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18SD / DC18SE / DC18SF
39 - 40 kg (86 - 88 lbs)
2.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3.
Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
Power tool plugs must match the outlet. Never
1.
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
2.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3.
Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
2 ENGLISH
XUC01
12°
130 kg (287 lbs)
Fixed with pedal
Tubeless tire
Self-sealing tire
D.C. 18 V
45 kg (99 lbs)
Publicidad
Tabla de contenido
