Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
FAN HEATER
8
THERMOSTAT
•
Turn the thermostat knob clockwise to increase the air emission (tem-
perature) and to start the heating or the fan.
•
The operating lamp lights up.
•
Turn the knob counter clockwise to decrease the temperature or turn off
the heating or fan. HEATING FUNCTION
•
Select "I" in the function selector to obtain the minimum heat level (1000
Watts). Select "II" to get the maximum heat level that can be set (2000
Watts).
•
Turn clockwise the thermostat knob to adjust the heat.
•
To reach the maximum heating level, select "2" and turn the thermostat
knob clockwise.
VENTILATION FUNCTION
•
Place the function selector on X (ventilation only). The Fan heater will emit
fresh air.
•
Adjust the thermostat clockwise until the fan starts; The operating lamp
lights up.
•
To switch off, position the function selector to the "0" position and rotate
the thermostat counter- clockwise; The operating lamp switches off.
•
Use the handle to carry or move the fan heater.
MAINTENANCE AND CLEANING
To maximize the efficiency of the heater clean regularly.
1.
Switch power switches to OFF position "O", unplug and allow the
heater to cool.
2.
Wipe surfaces with a soft damp cloth. Do not use detergent or
abrasives as this will scratch the surface.
3.
Ensure the intake grill is free from dust, as this will reduce the airflow.
Light accumulated dust can be removed with soft cloth or vacuum cleaner.
4.
Allow surface to fully dry before using the heater again.
Publicidad
Tabla de contenido
