Installation - Ducasa PTL BC 30 C Manual Del Usuario

5. Installation.

Choosing the right location
Recommend installation
50 cm
19,7 pu
Tools Needed
- Medium Philips screwdriver
- Tape measure or ruler
- Knife or scissors
- Saw (optional, to shorten window adaptor for narrow windows)
Accessories
Check your window size and choose the fit window slider.
Your installation location should meet the
following requirements:
- Make sure that you install your unit on an
even surface to minimize noise and vibration.
- The unit must be installed near a grounded
plug, and the Collection Tray Drain (found on
the back of the unit) must be accessible.
The unit should be located at least 30cm (12")
-
from the nearest wall to ensure proper air
conditioning.
- DO NOT cover the Intakes, Outlets or
Remote Signal Receptor of the unit, as this
could cause damage to the unit.
NOTE:
All the illustrations in the manual are for
explanation purpose only. Your machine may be
slightly different. The actual shape shall prevail.
The unit can be controlled by the unit control
panel alone or with the remote controller.
76