Tool Description & Features; Electrical Specifications; Environmental Conditions - Greenlee HDE TAG-200X Manual De Instrucciones

Tool Description & Features
The TAG-200X and TAG-200XMR Voltage Detectors are designed to detect line voltage on distribution lines within a
range of operating voltages.
The TAG-200X Voltage Detector is a single range voltage detector with one range of operating
voltages set within the unit.
The TAG-200XMR Voltage Detector is a multi-range voltage detector that can be set for up to three
operating voltage levels.
Features
• Higher voltage levels can be set so the level is no more than three times (e.g. 4kV to 12 kV and 35kV) the
previous voltage setting.
• Specific voltages are chosen by the customer before delivery for the minimum and maximum ratings of the unit.
The on-product markings will show the specific voltage range settings of the unit.
• An audible alarm and red LEDs indicate voltage detection within range of the unit settings.
• The All-Check self-test feature provides a full test of the battery, the electronic circuitry and the audible and
visual alarm.
• A universal spline and shotgun connection for hot sticks is built into the polycarbonate housing.
Specifications
Dimensions .............................................................................10 in. x 2.5 in. x 3.7 in. (25.4 cm x 6.4 cm x 9.4 cm)
Weight ............................................................................................................................................0.86 lb (0.39 kg)
Buzzer Noise Level ............................................................................................................................ 103 dB @ 2 ft.

ENVIRONMENTAL CONDITIONS

Operating Temperature................................................................................................5°F to 120°F (-15°C to 49°C)
Enclosure Material ............................................................................................................. Polycarbonate UL94V-2
Printed Circuit Board .........................................................................................................................FR-4 UL94V-0
Environmental Conditions ................................................................................................. Indoor and Outdoor use
Humidity .................................................................................................................95% to 49°C (non-condensing)

ELECTRICAL SPECIFICATIONS

Minimum Voltage Setting ...............................................................................................4kV (2.4kV line-to-ground)
Maximum Voltage Setting .............................................................................................69kV (40kV line-to-ground)
Operating Frequency .................................................................................................................................. 50/60Hz
Check on product markings for the specific ranges of the unit.
BATTERY
Battery ................................................................. one 9V Alkaline 1604A, IEC 6LR61 or Lithium 9V ANSI-1604LC
Battery Life (Alkaline).................................................................................... ............ 10 hrs. Continuous Operation
Battery Life (Lithium).................................................................................. .............. 16 hrs. Continuous Operation
Battery life with typical usage .................................................................................................................... 1 month
All specifications are nominal and may change as design improvements occur.
52093091 REV 00
© 2021 Greenlee Tools, Inc.
TAG-200X & TAG-200XMR
5