SoundGate HONPDSDR Manual Del Usuario página 10

All manuals and user guides at all-guides.com
GOLD WING INSTALLATION
Figure 1
3 3
Complete installation (Please follow these directions or
the HONPDSDR will not work).
dipswitches on the HONPDSDR module set to CD mode, connect the HONPDSDR harness to the
HONPDSDR module. Connect the 14-pin male plug of the HONPDSDR to the white 14-pin female
plug of the Gold Wing.
Wait 5 seconds. Cycle the ignition (off/on) and press the CD button. The radio should recognize
the HONPDSDR as the CD source. If this does not happen, repeat this sequence. Leave the
factory 14-pin plug disconnected.
4 4
Route iPod cable and mount all components.
cable and mount the HONPDSDR (mounting hardware not included).
Be careful not to drill into wiring or vehicle mechanisms. You are solely
responsible for securely fastening the HONPDSDR in your vehicle. Make certain that wires and
cables cannot be damaged by screws, clips or sharp, exposed pieces of metal.
Ensure that the HONPDSDR plug and iPod cable are in convenient locations for connection.
Reassemble the motorcycle.
10
14-Pin White Female Plug
(CD Changer)
Turn the ignition on. With the
Route the iPod