Compulsory Safety Signs That The System Manufacturer Must Place At The Workplace And Around The Blm Vacuum/ Pressure Blowers Pump; Conditions And Limits Of Use - List Of Dangers - battioni Pagani BLM Serie Manual De Instrucciones De Uso Y Mantenimimento

COMPULSORY SAFETY SIGNS THAT THE SYSTEM MANUFACTURER
MUST PLACE AT THE WORKPLACE AND AROUND THE BLM
ATTENTION
PARTS
IN MOTION
DO NOT ENTER
THE WORK AREA
OF THE CARDANIC TRANSMISSION
IN MOTION,
AVOID WORK CLOTHING
WITH PARTS OR FLAPS THAT
COULD CONSTITUTE
A HOOKING ELEMENT
CONDITIONS AND LIMITS OF USE – LIST OF DANGERS
In the Common Market countries, the installation must comply with directive 2006/42/CE and subsequent modifications, while
in the other countries it must comply with the safety regulations of the country.
This pump for vacuum/pressure blowers was designed to create a vacuum or pressure inside a tank connected to it.
Under no circumstances must liquids, dust or any kind of solid matter enter the vacuum/pressure blowers
because they could cause it to break. Therefore it is necessary to equip the system with overflow safety
valves.
Use of the vacuum/pressure blowers pump for any purpose other than that specified is absolutely forbidden,
not provided for by the manufacturer and therefore highly dangerous.
Do not use the vacuum/pressure blowers pump to handle flammable and/or explosive liquids and materials
or for materials that give off flammable gasses.
Do not use the vacuum/pressure blowers pump in a potentially explosive atmosphere.
Never remove the guards fitted on the vacuum/pressure blowers pump and always check their efficiency
every time the machine is used.
Any intervention must be carried out with the machine stopped and by qualified personnel.
Unqualified personnel are not authorised to work on or near the vacuum/pressure blowers pump.
Battioni Pagani
instructions contained in the manual, non-compliance with current standards and failure to apply due
diligence during the manoeuvre, maintenance or repair operations, even if not expressly mentioned in this
manual.
Failure to comply with the instructions provided in this manual may result in the following dangers:
• Danger of being crushed by the weight of the vacuum/pressure blowers pump during handling and transportation;
• Danger of becoming caught in the transmission parts in case of removal of the appropriate protections (avoid clothing with wide
sleeves, ties, bracelets, necklaces, etc.);
• Heat dangers due to the temperatures that can be reached by the vacuum/pressure blowers pump;
• Acoustic danger due to the noise generated and to failure to use personal means of protection;
• Danger of severing for the operator during testing with intake and delivery tubes detached from the vacuum/pressure blowers
pump;
• Danger of projection of fluid and solid materials owing to heavy breakage of the vacuum/pressure blowers pump;
VACUUM/PRESSURE BLOWERS PUMP
ATTENTION
HOT WALLS
READ THIS MANUAL
BEFORE
STARTING TO USE THE
PUMP
INDICATION OF THE DIRECTION OF ROTATION OF THE
HANDLE TO SELECT THE
ASPIRATION OR COMPRESSION PHASES.
will not be responsible for problems, breakages and accidents due to failure to apply the
®
for use and maintenance of BLM series
DANGER
ATTENTION
TO HANDS
MAINTENANCE
TO BE PERFORMED
DISPLAY THE SAFETY
SIGNS IN A VISIBLE
POSITION AND NEAR
THE PUMP
instruction manual
PERSONAL
PROTECTION
EQUIPMENT
THAT MUST BE
USED
page 21