Input Selection - Rega io Manual De Instrucciones

Ocultar thumbs Ver también para io:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
07

INPUT SELECTION

7. On/Off Button - To turn the io on, press the black power button. After a few seconds, you will hear a relay 'click' and the io will be
operational.
8. Headphone Socket - 3.5mm stereo headphone jack.
9. Input Display - To change between inputs, press the small black button located next to the row of input digits to cycle through 1-3. The
selected input is highlighted by the number lighting up in red. Input selection can also be changed with the remote.
10. Volume Control - The volume control has a minimum and maximum value which is indicated by the notch. The volume does not reset
after each use. Before plugging in headphones, make sure the volume is reduced.
11. Mute - Mute on the io is controlled by the remote (see next page).
7
8
9
10

Publicidad

Tabla de contenido
loading

Tabla de contenido