Labelmate PM-300-CS Manual De Instrucciones página 3

About your PM-300-CS/STEP
The LABELMATE PM-300 printer mechanism is ready to be completed with the hardware of your
choice. Some examples are inkjet-heads, laser-encoders, barcode verifiers or RFID encoders.
GENERAL CONTENT OF THE PACKAGING
Remove all parts from the shipping container and verify content
• User Manual (this document)
• PM-300-CS or PM-300-CS-STEP Printer Mechanism Unit
• Power Cord
Retain the shipping container and packaging for storage and transport
FEATURES
• Designed for processing labels with a maximum width of 125 mm
• 1 Powerful motor, the PM-units are NOT Bi-Directional
• Maximum roll diameter : 300 mm
• Max label roll weight: 6 KG
• CS MODEL Speed : Adjustable from 0 to max. 40cm/s or 61cm/s
CS-STEP MODEL Speed : Adjustable from 0 to max 40cm/s
Accuracy +/- 5%
• Max speed specified with a 76mm take-up roll diameter and reached at the end of the roll, in normal office room
temperatures.
• Take up reel : The take-up torque is adjustable and it is possible to select wind-in or wind-out.
• Power Supply : 230VAC- 50-60Hz (115V on request)
• Comes standard for using cores in 76mm. On request available in 38/40/44/70/100 mm.
• Optional PC-2 Counter is a pre-set label counter that allows stopping the machine after a pre-set number of labels.
• Optional PC-3 offers the same pre-set possibilities as the PC-2 but can also be programmed to indicate the web
speed. The programming details can be found on a separate manual.
• Optional Encoder : 4096 pulses per revolution = linear resolution of 0.041mm
P/N MODEL
LMP005 PM-300-CS
LMP006 PM-300-CS-STEP Constant Speed model with "1 by 1" mode
Quick-Change
LMX454
Shaft
LMX478 ENC PM-CS
LMX474 PC-2
LMX475 PC-3
LMX477 WEB-BC
CS & CS-STEP-MODELS
DESCRIPTION
Reel to Reel Mechanism. Constant Speed Model
PM-300-OPTIONS
Complete take-up shaft with vanes. NOT AVAILABLE FOR UNWINDING SHAFT.
Optional built-in encoder with resolution of 0,041mm.
Optional 6-digit pre-set counter. Counts label batch size. Factory installed.
Dual function preset counter. Allows to count labels or show instantaneous web
speed. Factory installed.
Mounting bracket and cable for Markoprint (Weber)™ X1-Jet print head.
MAX SPEED (cm/sec)
40 or 61
40
Labelmate.com