Specifications; Operating Conditions - WIKA EMICOgauge Manual De Instrucciones

9. Specifications

9. Specifications
Basic information for pressure gauges
Scale range
Connection location
Assembly
Mounting type
Instrumentation valve

Operating conditions

Medium temperature
With unfilled pressure gauge
With filled pressure gauge
Ambient temperature
Leak tightness of the overall
system
WIKA additional operating instructions for EMICOgauge
Between 0 ... 0.6 bar and 0 ... 420 bar
[0 ... 10 psi and 0 ... 6,000 psi]
As well as corresponding measuring spans for other units and
+/- scale ranges
Lower mount (radial)
EMICOgauge connection: 360° swivel connection (swivel
adapter) with special pressure sealing
Spare part: 5 x sealing set consisting of O-ring and support
ring; article no. 14525042
For instrument version of IVM → See data sheet AC 09.17
■
Model IV10, IV11 or IV20 → See data sheets AC 09.22 and
■
AC 09.19
-20 ... +150 °C [-4 ... +302 °F]
-20 ... +100 °C [-4 ... +212 °F]
-20 ... +60 °C [-4 ... +140 °F]
Fulfills the fugitive emission requirements
per TA Luft (VDI 2440), helium tested,
specific leakage rate: < 1∙10 mbar l/m s
-4
EN
17