General Information - WIKA EMICOgauge Manual De Instrucciones

1. General information

Supplementary documentation
These additional operating instructions apply in connection with the following documents:
▶
Operating instructions of the mounted pressure gauge, e.g. "Mechanical pressure
measuring instruments", article number 2408976
EN
▶
Operating instructions of the mounted instrumentation valve, e.g. "Shut-off valves and
valve manifolds", article number 14294094
▶
Documents of the components used
1. General information
The instrument described in the operating instructions has been designed and manufac-
■
tured using state-of-the-art technology. All components are subject to stringent quality
and environmental criteria during production. Our management systems are certified to
ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the instrument.
■
Working safely requires that all safety instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and general safety regula-
■
tions for the instrument's range of use.
The operating instructions are part of the product and must be kept in the immediate
■
vicinity of the instrument and readily accessible to skilled personnel at any time. Pass
the operating instructions on to the next operator or owner of the instrument.
Skilled personnel must have carefully read and understood all operating instructions
■
supplied, prior to beginning any work.
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Factory calibrations / DKD/DAkkS calibrations are carried out in accordance with inter-
■
national standards.
4 WIKA additional operating instructions for EMICOgauge